■ 14
│
GB
│
IE
SHFD 1400 B2
NOTE
► You can press and hold the
o or
a buttons to scroll through
the values quickly.
3) Start the cooking process, if you have not already done so, by briefly
pressing the Start/Stop button
p.
9 The fan symbol
q on the control panel and the symbol of the
selected programme flash simultaneously. The appliance starts to
heat up.
7.3 Using the programmes
The appliance has 8 preset cooking programmes. When you select
one of the programmes, the corresponding programme symbol lights
up in the upper section of the control panel 1. The preset temperature
and cooking time are shown on the display z. You can change these
settings depending on the recipe or your own needs, as described in the
previous section.
How to set a programme:
1) Press the On/Off button
i if the appliance is in standby mode.
9 The control symbols in the lower section of the control panel 1 light
up.
2) Press the programme selection button
u
repeatedly until the
symbol for the desired programme lights up in the upper section
of the control panel 1.
9 The preset temperature and cooking time for this programme are
shown alternately on the display z.
NOTE
► The temperature and cooking time appear alternately every
5 seconds on the display z. To switch between temperature
and cooking time more quickly, press the
button s.
3) If necessary, adjust the temperature and cooking time using the
o
or
a buttons to suit your requirements.
4) Press the Start/Stop button
p.
9 The fan symbol
q on the control panel and the symbol of the
selected programme flash simultaneously. The appliance starts to
heat up.
To Next Page
Loading...
