GB
│
IE
│
15 ■
SHFD 1400 B2
At the end of the programme, the appliance switches off automatically:
you will hear several beeps, the fan symbol
q goes out and ""
flashes on the display z for several seconds. After this, all displays
go out except for the On/Off button
i. The appliance is back in
standby mode.
7.4 Pausing a programme
You can pause the frying process at any time, e.g. to check the degree
of browning or to shake or turn the food.
1) Press the Start/Stop button
p.
9 The fan symbol
q goes out, the Start/Stop button
p flashes.
The temperature and remaining cooking time are shown alternately
on the display z. The programme indicator lights up continuously.
2) Pull the pan 7 out of the housing 8 by the handle 6.
3) Turn or shake the food in the frying basket 2 if necessary.
CAUTION – PROPERTY DAMAGE!
► The pan 7 and the frying basket 2 are provided with a non-stick
coating. To protect the non-stick coating, do not use metallic tools
such as knives, forks, etc. to turn the food or take it out.
4) Replace the pan 7 with the frying basket 2.
5) Press the Start/Stop button
p again.
9 The programme display and the fan symbol
q flash simultaneously
again.
9 The programme continues automatically until the end of the cooking
time.
NOTE
► You can also remove the pan 7 from the appliance without pressing
the Start/Stop button
p. The programme stops automatically
and resumes as soon as you 7 insert the pan again. You do not
need to press any button to do this.
7.5 Cancelling a programme
To cancel a programme, end the cooking process prematurely or return
to the basic settings, press and hold the On/Off button
i for
approx. 3 seconds.
9 You will hear a beep. All displays except for the On/Off button
i
go out. The appliance is back in standby mode.
To Next Page
Loading...
