EasyManua.ls Logo

Silvercrest SHFD 1400 B2 - Operation - Food Removal; Removing Fried Food

Silvercrest SHFD 1400 B2
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 
GB
IE
SHFD 1400 B2
7.6 Removing fried food
RISK OF BURNS!
Use pot holders or protective gloves, if you have to touch the pan 7
or the frying basket 2.
Once the frying process is finished, you will hear several beeps and
"" appears on the display z. The appliance switches automatically
into standby mode.
1) Switch off the appliance by pulling out the mains plug.
2) Have a heat-resistant base for the pan 7 and the frying basket 2
and a container, e.g. plate or bowl, ready for the fried food.
3) Pull the pan 7 out of the housing 8 by the handle 6.
CAUTION – PROPERTY DAMAGE!
Never disconnect the frying basket 2 from the pan 7 while holding
it in your hand, otherwise it will fall. Before doing this, place the
pan 7 on a heat-resistant surface.
4) Push the unlock protection 4 in the direction of the arrow so that
the release button 5 underneath it is revealed.
5) Press the release button 5 and, at the same time, lift the frying
basket 2 upwards out of the pan 7.
6) Place the frying basket 2 on a heat-resistant surface.

Table of Contents

Related product manuals