86 |
GN70/MX61X AIS operation | V5035 Operator and Installation Manual
Vessel alarms
You can define several alarms to alert you if a target comes within
predefined range limits, or if a target is lost.
Alarm ID Description
Dangerous vessel Controls whether an alarm shall be activated
when a vessel comes within the predefined
CPA or TCPA. See Defining dangerous vessels
on page 55.
Note: The check box controls whether the
alarm pop-up box is displayed and if the siren
will sound. The CPA and TCPA define when a
vessel is dangerous regardless of the enabled/
disabled state.
AIS vessel lost Sets the range for lost vessels. If a vessel is lost
within this range this will trigger an alarm.
Vessel message Controls whether an alarm shall be activated
when a message is received from an AIS
target.
¼ Note: Please refer to the GN70/MX61x User manual for more AIS
operation.
To Next Page
Loading...
Need help?
General
