NANYTE BEAM Manual
NANYTE BEAM Manual BM-001-A3 / V1.1a Page 9 of 33
System requirements
Power
BEAM operates on 100-240 VAC 50-60 Hz. Line voltage and frequency are automatically
sensed; therefore, no switches are to be set. Check that the operating voltage in your area is
compatible.
CAUTION – Operating the equipment on an incorrect line voltage may cause damage, possibly
voiding the warranty.
Location
Indoor, dust free, near-non-conductive pollution (degree 2 of EN61010-1:2010)
Tabletop vibration should be kept under VC-A (50 um/s)
Cleanroom environment is optional
Equipment must be shaded from indirect sunlight
Relative humidity < 80% (no condensation)
Altitude < 2000 m
Temperature 10-25 C
Host Computer Minimum Requirements
NANYTE offers the option to ship BEAM along with a pre-configured laptop. Please contact your
local representative for such an option. If you are using your own computer, ensure that it meets
the below specifications.
CPU: Intel 9
th
Gen i7 9750H 6-core
GPU: NVIDIA GTX 1060
RAM: 16 GB
Storage: > 500 GB SSD
OS: Windows 10 Home or Professional Editions
Networking: Wi-Fi or Ethernet connection required for remote assistance
Others: Trackpads are not recommended for use with the control software.
www.simtrum.com
To Next Page
Loading...