Sirona CEREC MC - Machining Process Overview; Grinding Instruments and Procedures

63 98 650 D 3439
40 D 3439.201.07.10.23 10.2017
6Operation Dentsply Sirona
6.4Machining process Operating Instructions (valid for USA) Sirona Dental CAD/CAM System
6.4
Machining process
6.4.1 Process types
Various process types are available for milling and grinding purposes.
These vary in terms of the type of materials to be processed and the
instruments to be used.
6.4.1.1
Grinding
For grinding purposes, use the following instruments as well as the
appropriate torque wrench:
Instrument REF Torque wrench Clamping format of the
force transmission
Step Bur 12 S 6240167 Triangular
Step Bur 12 6260025
Cyl. Pointed Bur 12 S 6240159
Step Bur 20 6259597
Cyl. Pointed Bur 20 6259589