Sirona CEREC MC - Consumables List; Grinding Instruments List; Milling Instruments List

63 98 650 D 3439
64 D 3439.201.07.10.23 10.2017
9Consumable Dentsply Sirona
Operating Instructions (valid for USA) Sirona Dental CAD/CAM System
9
Consumable
Grinding instruments
Milling instruments**
Left-hand side REF Right-hand side
Step Bur 12 S (6x) 62 40 167 62 40 159 Cyl. Pointed Bur 12 S (6x)
Step Bur 12 (6x) 62 60 025
Cylinder Bur 12 EF (6x)* 65 35 186 65 35 178 Cylinder Pointed Bur 12 EF (6x)*
* Only with 4-motor milling/grinding units.
Step Bur 20 (6x) 62 59 597 62 59 589 Cyl. Pointed Bur 20 (6x)
Left-hand side REF Right-hand side
Shaper 25 (3x) – dry milling*** 62 99 395 62 99 387 Finisher 10 (3x) – dry and wet milling
Shaper 25 RZ (3x) – wet milling 64 33 440
* Milling possible: only with milling/grinding machines from the following serial numbers: inLab MC XL 129001,
CEREC MC XL 129001, CEREC MC XL Premium Package 302001, CEREC MC X 231001 or replacement of the
left motor on 2-motor machines or of the left motor in the motor set 1 on 4-motor machines.
*** Requires CEREC milling/grinding unit with dry milling configuration and CEREC suction.
REF Description Illustration
58 09 640 DENTATEC 1000ml
63 87 067 Filters MC/MC X (1x)
64 29 950 Filters MC/MCX (pack of 6)