SIUI SR-8210 - Page 40

Use and Operation
6-4
patient posture, body type and exposure angle
for imaging. When pressing the APR button, the
corresponding indicator is on and the exposure
parameters set by the manufacturer or user will
be displayed on the digital tube. Long press
APR8 to adjust mA.
10 Button
Collimator Light Button
See 6.4 for more information.
11 Button
APR Parameter Save Button- SAVE
Press one APR button, and the exposure
parameters can be adjusted by kV or mAs
control button. When the APR parameter save
button is pressed, the parameters will be saved
in the ROM of the generator. Press the APR
button again to display the modified parameter
combination on kV or mAs display digital tube.
12 Button
Engineering Mode Button- Fn
Long press the button till a "Di" sound to turn on
or off the keyboard backlight.
13 Button
On/ Off Button
Press it to turn on/ off the device.
14 Indicator
Battery Power Indicator
The indicator displays the current battery power
after turning on the device. There are five levels.
15 Button
One-press Exposure Switch Button
When the button is pressed in the normal mode,
the exposure mode can be switched between
Level1 (one-press) and c (two-press) exposure.
Long press the button to view the current