SIUI SR-8210 - Page 46

Use and Operation
6-10
Menu No. Menu Menu Function
Restore
factory
defaults
192.168.8.199
Device 2:
192.168.8.200
Device 3:
192.168.8.201
Device 4:
192.168.8.202
P37
Modify remote
port
When P40 is 0, modify the
communication port in the DR system
mode and press APR1-5 to switch
between different remote devices.
When P40 is 2, modify the
communication port in high voltage
generator mode.
The default
value of the
remote port is
18100.
The local ports
of devices 0-4
are
sequentially
increased from
18101 to
18105.
P38
Modify
usable
number of
DR system
modes
0 is not usable, 1 is usable, and up to 5
usable devices.
Default 10000
(that is, only
one PC device
can be used)
P39
Modify the IP
address of the
X-ray
machine in
the DR
system mode
Valid when P40 is 0.
The default is
192.168.8.16
P40 Modify 0 is the DR system mode.
The default is