A8 mini User Manual v1.5
13
2023 SIYI Technology Co., Ltd, All Rights Reserved
1.4 Packing List
1 x A8 mini Gimbal Camera
1 x MK15 / HM30 Air Unit S.Bus Y Cable
(Connect SIYI MK15 and HM30 air unit’s S.Bus port to acquire control signal, then one connector
of the cable goes to SIYI gimbal, another goes to flight controller)
1 x 3 in 1 Control Cable
(A universal cable for ZT30, ZR30, and A8 mini, it connects SIYI gimbal’s control signal port with
SIYI link and controller, including UART control input, S.Bus input and output)
1 x SIYI Gimbal Power Cable
(Power supply cable for SIYI gimbal)
1 x SIYI Gimbal Ethernet Cable
(A backup cable for customer DIY purpose to connect SIYI gimbal to third-party Ethernet devices)
1 x SIYI Gimbal to SIYI Link Cable
(An all-in-one cable for only touch screen control to SIYI gimbal through SIYI link, it can power
SIYI gimbal and can also transfer video stream and control signal)
1 x SIYI Gimbal Ethernet to RJ45 Cable
(Connect SIYI gimbal with RJ45 device directly)
1 x A8 mini Screw Pack
(Using with the fixing board to mount the gimbal, including 6 x Hex Socket Cap Screw M2.5*5, 10
x Cross Recessed Flat Head Screw M2.5*10, 8 x M2.5 Nut Black)
1 x A8 mini Mounting Board & Damper Pack
(For mounting and fixing gimbal and stabilization)
To Next Page
Loading...
