SIYI A8 mini - 4.7 Output by CVBS; AV Signal

A8 mini User Manual v1.5
66
2023 SIYI Technology Co., Ltd, All Rights Reserved
Go to the “Gimbal Config” page in SIYI Assistant program to change the video output mode
to HDMI, then A8 mini will stream from its Micro-HDMI port.
When A8 mini is outputting video to a third-party link through HDMI, SIYI FPV and SIYI
FPV app cannot control the gimbal by touchscreen. Please use S.Bus or UART control
instead.
4.7 Output by CVBS / AV Signal
A8 mini can output video stream by AV signal through the Ethernet video output
port.
Mark
The default video output method of A8 mini is Ethernet.
Go to the “Gimbal Config” page in SIYI Assistant program to change the video output mode
to “CVBS”, then A8 mini video stream will output as AV signal through the CVBS pin in
the Ethernet port.
4.8 Solutions to No Image
If gimbal camera failed to output video or the video cannot be displayed properly,
please follow the steps below for trouble shooting.