A8 mini User Manual v1.5
67
2023 SIYI Technology Co., Ltd, All Rights Reserved
1. Confirm if the link’s ground unit is communicating with the air unit and if the
camera is connected to the air unit.
2. Check Camera IP addresses and RTSP addresses.
3. If you are using SIYI FPV app, check the connection status, app version, video
stream settings.
4. If you are using SIYI handheld ground stations, check the Ethernet switch in
Android system.
5. Please double check if the gimbal camera’s IP addresses was modified
accidentally.
If video still does not show up, please follow the steps below and make a deep
investigation according to the video output mode, the video display device, and the
application / software you are using.
4.8.1 Video Output to Android Device
1. Input SIYI gimbal’s default IP addresses “192.168.144.25” in the “Ping Tools” app
and check if the network communication is successful. If the tool responds, then
check if the RTSP address in the application / software is correct.
To Next Page
Loading...
