A8 mini User Manual v1.5
25
2023 SIYI Technology Co., Ltd, All Rights Reserved
⚫ Channel 12 = Button D
In SIYI PC Assistant, map “Yaw” function to channel 7 and “Pitch” to channel 8,
“Center” to channel 12.
Then, if you operate the left dial on MK15 remote controller, gimbal will rotate on
yaw axis. If you operate the right dial, gimbal will rotate on pitch axis. Press button
D, gimbal will center itself automatically.
Mark
Hold the dial from its center position, gimbal will keep rotating unless there was a physical
limit. Farther you hold it away from center, faster gimbal rotates.
3.2.3 Zoom (Taking an example of MK15 Switches)
Below is the suggested MK15 channel mapping settings for testing, customers are
free to assign MK15 channel mappings as required through SIYI TX app.
⚫ Channel 13 = Left Switch SA
In SIYI PC Assistant, map “Zoom” function to channel 13。
Then, if you operate the SA switch on MK15 remote controller, camera will zoom in
or zoom out, max 6X digital zoom.
To Next Page
Loading...
