SIYI A8 mini - 4.6 Output by HDMI

A8 mini User Manual v1.5
65
2023 SIYI Technology Co., Ltd, All Rights Reserved
CAUTION
SIYI gimbal camera Ethernet port’s “RX-” pinout should connect to the third-party link
Ethernet port’s “RX-” pinout, and “RX+” pinout to “RX+” pinout. Do not cross the pinouts,
otherwise it will cause damage to the device.
Steps
1. Power the air unit of the third-party link and bind it with the ground unit.
2. Use the video cable to connect SIYI gimbal camera’s Ethernet port and the third-
party link’s Ethernet port.
3. Open RTSP video player and input SIYI gimbal camera’s default RTSP
addresses, if connection is successful, video will display normally.
Mark
SIYI QGC Android app and Windows software support video display from third-party links
as well.
4.6 Output by HDMI
A8 mini can output video to any HDMI monitor or to third-party link which support
HDMI input through the Micro-HDMI port.
Mark
The default video output mode of A8 mini is Ethernet.