A8 mini User Manual v1.5
20
2023 SIYI Technology Co., Ltd, All Rights Reserved
SIYI QGC App Steps
1. Power air unit and bind it with ground station.
2. Use SIYI Gimbal to SIYI Link Cable to connect the air unit’s Ethernet port with
the gimbal camera’s Ethernet port.
3. Run SIYI QGC app, go to “Comm Links – Video Settings”, and select “RTSP
Video Stream” for “Source”, then enter the default RTSP addresses of SIYI
gimbal camera, video stream will display. Gimbal motion and camera functions
can be controlled by ground station touchscreen.
3.1.2 Gimbal Pitch and Yaw Rotation
While SIYI FPV App or SIYI QGC app is running,
Sliding on touchscreen can control gimbal rotation. Sliding left and right are yaw
rotation, up and down are gimbal pitch rotation.
Double tap touchscreen, gimbal will automatically center.
Mark
Slide on touchscreen and hold it, gimbal will continue rotating till it reaches physical limit.
Farther that you hold it from the center of the screen, faster the gimbal rotates.
3.1.3 Zoom
While SIYI FPV App or SIYI QGC app is running,
To Next Page
Loading...
