A8 mini User Manual v1.5
14
2023 SIYI Technology Co., Ltd, All Rights Reserved
1.5 Indicator Definition
The status indicator on SIYI gimbal uses three different colors and different blinking
frequencies to indicate the system’s working or abnormal status.
Solid Green: Normally working.
Slow Green Blinks: S.Bus signal input is normal.
Slow Red Blinks: Firmware does not match (camera firmware or gimbal firmware or
neither).
Red-Red-Yellow Blinks Continuously: Fail to identify camera board.
Yellow Blinks: Power input voltage is low (lower than 10 V).
Double Red Blinks: IMU temperature rising is abnormal.
Double Yellow Blinks: IMU temperature is rising.
Triple Yellow Blinks: IMU temperature is abnormal.
To Next Page
