A8 mini User Manual v1.5
41
2023 SIYI Technology Co., Ltd, All Rights Reserved
2. Chang the gimbal camera’s server port and IP addresses to what you need. The double
quotation marks of the IP addresses should be kept.
3. Create a socket keyword.
4. Send data to the gimbal camera and do not revise.
5. Receive data responded by the gimbal camera and do not revise.
6. Print the received data in hexadecimal and do not revise.
7. Following the above steps, compile and run the SDK and you will see the printed data below,
which means data can be sent and received normally. At this moment, please observe if the
gimbal camera executes the relevant actions.
To Next Page
Loading...
