A8 mini User Manual v1.5
77
2023 SIYI Technology Co., Ltd, All Rights Reserved
scenes.
⚫ Under Follow Mode, gimbal follows when aircraft rotates horizontally, compatible with
multi-copter drones.
⚫ Under Lock Mode, gimbal does not follow when aircraft rotates horizontally.
Video Output: Switch gimbal camera’s video output method.
⚫ HDMI: A8 mini gimbal camera outputs video stream through the Micro-HDMI port.
⚫ CVBS: A8 mini gimbal camera outputs video stream through the CVBS pin of the
Ethernet port by AV signal.
⚫ OFF: A8 mini gimbal camera only outputs video stream through the Ethernet port.
HDMI Latency Mode: Switch A8 mini gimbal camera’s latency mode under HDMI / CVBS
video output method.
⚫ Normal: Ethernet port outputs video stream, recording function is normal.
⚫ Low Latency: Ethernet port video output is disabled, recording function is normal.
⚫ Lowest Latency: Both Ethernet port video output and recording function are disabled.
Camera Firmware Version: Display the current camera firmware version.
Gimbal Firmware Version: Display the current gimbal firmware version.
Mark
After switching video output mode or HDMI latency mode, gimbal camera should be
restarted to implement the change.
Gimbal working mode is Follow Mode in default every time it is started.
To Next Page
Loading...
