MK32E User Manual V1.1
3
2023 SIYI Technology, All Rights Reserved
Before starting your aircraft / vehicle for the first time, make sure that the fail-safe
settings on the remote controller is activated.
Always turn on remote controller first and make the joysticks stay in zero throttle
position, then start your aircraft / vehicle / model.
Battery
MK32E ground station is equipped with a built-in and chargeable high-capacity Li-
on battery. Please do read the precautions below before using it.
Always turn off remote controller before charging. The remote controller does not
charge while it is working.
Stop charging immediately if you found the charger damaged, broken or overheat.
Stop charging immediately if there was a peculiar smell, smoke or leak. In such cases
you shall contact your seller for after-sale service immediately.
Do not charge remote controller when temperature is high, or battery temperature is
over 60ā.
Memory Card (SD/TF)
The memory card slot at bottom MK32E ground station is compatible with high-
speed SD / TF card. Please pay attention to the precautions below.