MK32E User Manual V1.1
67
2023 SIYI Technology, All Rights Reserved
4.2 Communication with GCS through USB COM (Taking QGC as
an Example)
Let’s take QGroundControl as an example.
1. In “SIYI TX” app, go to “Datalink”, and choose “USB COM” in “Connection”.
2. Open QGC, the software will pop up a window to ask if “Allow QGroundControl
to access CP2102 USB to UART Bridge Controller?” Check and touch “OK”.
3. The top progress bar in QGC starts to move, which means the remote
controller is trying to communicate with QGroundControl. After that the datalink
connection will be established.
To Next Page
Loading...
