MK32E User Manual V1.1
93
2023 SIYI Technology, All Rights Reserved
to start video recording. Touch “Recording” icon to stop video recording.
Mark
Before taking a picture or recording video, it is necessary to insert TF/SD card into the
camera.
6.2 Using Third-Party IP Cameras / Pods
Before connecting a third-party camera or pod to the air unit, please change its IP
address to “192.168.144.X”.
Mark
The X should not be “11”, “12”, or “20”, otherwise it won’t work. The three addresses
have been occupied by the air unit, the ground unit, and the Android system.
Steps
Let’s take QGroundControl as an example.
1. In camera settings, check and copy the RTSP address of your IP camera / pod.
2. In QGC, go to “General” page and slide to “Video Settings”.
To Next Page
Loading...
