MK32E User Manual V1.1
52
2023 SIYI Technology, All Rights Reserved
3.6.2 Dials
The function changes the way the two knobs (LD1, RD1) and the two dials (LD2,
RD2) work on MK32E ground unit.
About Dials
Centering: Under “Centering” mode, when you push the dial and release, the dial’s
outputting value will return to the initial value (middle point of the channel).
Thumb-slide: Under “Thumb-slide” mode, when you push the dial and release, the dial’s
outputting value will stay at the current value.
3.7 Joystick Calibration
Joystick calibration function help users calibrate both joysticks’ middle positions
and maximum / minimum positions. Regular calibration helps maintain the control
accuracy of the joysticks.
To Next Page
Loading...
