MK32E User Manual V1.1
59
2023 SIYI Technology, All Rights Reserved
About Multiple Links
Function Type: Switch the function between “RC Relay” and “Dual RC” and switching
between “TX-A” and “TX-B” at the same time.
Bind: Bind “TX-A” and “TX-B” with the air unit in turns after configuring function type.
Control Switch: Define a button or a switch to take over control in “RC Relay” mode, or to
switch control of certain channels between “TX-A” and “TX-B” in “Dual RC” mode.
Control Channel: In “Dual RC” mode, define channel mapping for TX-A and assign
channels to TX-B according to your requirement.
3.9.1 RC Relay
RC Relay function is specially developed for very long-range drone flight. In this
mode, two ground units can relay control through the same air unit to reach twice
of the range limit of a single system. The function can be widely used in enterprise
drones for inspecting power lines, drone delivery, and cargo shipping.
Steps
1. Prepare two MK32E Dual versions.
2. Go to “Multiple Links – Function Type”, assign the two ground units as “RC
Relay TX-A” and “RC Relay TX-B”.
To Next Page
Loading...
