MK32E User Manual V1.1
106
2023 SIYI Technology, All Rights Reserved
4. If the firmware is not the latest, then click the “Select File” button in the “RC”
line to import the latest remote controller firmware. Then click “Upgrade” and
wait till it is “100%” finished.
5. Disconnect the ground unit from the Windows device. Connect the air unit’s
Type-C port to your Windows device’s USB port. Then repeat the above steps
to upgrade air unit firmware.
Mark
Please choose the correct firmware according to the initial number in the boot loader
number version. For instance, if the boot loader number is 5.1.0, then please choose the RF
To Next Page
