VD32 Remote Controller User Manual v1.2
- 38 -
2020 SIYI Technology Copyright
End Point
Set the output values of a channel and the maximum / minimum limit.
CH Mapping (Channel Mapping)
Set / Change the defined function of a channel.
CH Reverse (Channel Reverse)
Reverse a channel’s output direction.
Sub-trim
Do trim adjustment to your aircraft’s flight attitude.
Trim Setting
Adjust the stepping value of the sub-trim function.
Trainer Mode
One on one training through two transmitters.
Fail Safe
Adjust fail safe settings.
Timer
Turn on / off the timer.
LowVol Alert (Low Voltage Alert)
Low power alert of the aircraft battery.
Special Function for Agricultural Drones
Farm. Voice (Farming Voice)
Real-time voice broadcast specialized for agricultural drones.
JstkDeadZone (Joystick Dead Zone)
Filter mistaken manipulation caused by touching joysticks unintentionally.
MultiDroCtrl (Multi-Drone Control)
Control the flight of up to three drones at the same time through one transmitter.
To Next Page
Loading...
