VD32 Remote Controller User Manual v1.2
- 72 -
2020 SIYI Technology Copyright
1. In the system settings menu, tap on “H / W Settings”, in the screen it shows the
H / W settings menu;
2. Tap on “Position / Speed” to switch the left dial’s working mode; in speed mode,
“+ / -” is to input the stepping value so as to change the LD’s rotating speed.
How to Define the S1 / S4 / S5 / S6 Switch
In the H / W settings menu, select a switch according to your requirement, tap on
“Self-locking / Self-resetting” to define the working mode.
6.4 Extending Ports Settings
The extending ports function help users extend transmitter function to external
hardware devices and SDK. Currently VD32 transmitter supports a Micro-USB port,
a USB port and a 4-Pin Groove Port (DATA1).
The Assigned Function to the Extending Ports
Micro-USB: Charging, parameter adjustment, firmware upgrading and datalink output.
USB: Datalink output.
To Next Page
Loading...
