VD32 Remote Controller User Manual v1.2
- 80 -
2020 SIYI Technology Copyright
6.8 Power Ratio
6.8.1 RF Power
Power ratio function helps users adjust RF transmitting power output according to
their requirement. Optional output power is 10dBm or 27 dBm.
Steps
1. Power on the transmitter and sky station, make sure that they are linked with
each other;
2. In the system settings menu, tap on “Power Ratio”, in the screen it shows the
power ratio menu;
3. Tap on “RF Power” to choose “10dBm” or “27dBm” for power output;
4. Tap on “Return” to finish setting.
To Next Page
Loading...
