VD32 Remote Controller User Manual v1.2
- 49 -
2020 SIYI Technology Copyright
5.5 Channel Mapping
All 16 channels of VD32 transmitter can be mapped freely as you need to the
joysticks, switches, buttons, and dials.
Steps
1. Please refer to the picture above. Tap on the last box on right of your target
channel to open the list of all joysticks, switches, buttons, and dials.
2. In VD32 transmitter system, channel 1-4 is default to be Aileron, Elevator,
Throttle, and Rudder.
To Next Page
Loading...
