SIYI VD32 - 5.10 Fail Safe Settings

VD32 Remote Controller User Manual v1.2
- 58 -
2020 SIYI Technology Copyright
5.10 Fail Safe
Before linking VD32 transmitter to VD32 receiver, do not forget to do fail-safe
settings and turn on the function, thus if your transmitter lost linkage with receiver,
fail-safe function will run automatically and immediately to protect your model from
a crash.
Steps
1. Make sure the transmitter is linked to receiver.
2. In “Model Settings” menu, tap on “Fail Safe” to enter Fail-Safe menu;