VD32 Remote Controller User Manual v1.2
- 60 -
2020 SIYI Technology Copyright
WARNING
For flight safety, Fail-Safe settings must be done and the function must be turned on before
taking-off.
5.11 Timer
In VD32 transmitter main menu there are two timers.
Timing Mode
Up: Counts from 0, the timer alerts when it reaches the time.
Down: Counts from the start time, the timer alerts when it is back to 0.
Define a Timer Function Switch
Start: Define a switch / button for “Start”.
Stop: Define a switch / button for “Stop”.
Reset: Define a switch / button for “Reset”.
To Next Page
