VD32 Remote Controller User Manual v1.2
- 66 -
2020 SIYI Technology Copyright
When the “Syn-control” function is activated, VD32 transmitter can control up to
three drones at the same time. Under this circumstance, all drones fly at the same
pace. The datalink only goes with one drone, which is the drone in control before
activating the “Syn-control” function.
CAUTION
Please keep a safe distance between the drones when the “Syn-Control” function is activated.
Steps
1. In the model settings menu, tap on “MultiDroCtrl”, in the screen it shows the
multi-drone control menu;
2. Tap on “SwitchDr”, define a 3-stage switch according to your requirement to
switch the control of the drones;
3. Tap on “Syn-Control”, define a 2-stage switch or a button (S3/S4 is better) to
switch on/off the function;
4. Hold the “link” button on the sky station of the drone No.1; when the indicator
blinks red fast, go to the “MultiDroCtrl” menu, tap on “NoLink” of the drone No.1;
When the indicator is on green, linking is finished.
5. Repeat Step 4 for drone No.2 and drone No.3 to finish all the linking process.
To Next Page
