VD32 Remote Controller User Manual v1.2
- 92 -
2020 SIYI Technology Copyright
CAUTION
Before connecting the Micro-USB port of the transmitter to a smartphone or a tablet to
communicate with the flight controller, you need to switch the port to Datalink.
Steps
In the “System Settings” menu, tap on “Port Settings”; tap on “Micro-USB” to switch the
port to “Datalink”.
Mark: When you switch the Micro-USB port to “Datalink”, the transmitter can no
longer communicate with PC through the port. If you are to communicate it with a computer
for firmware upgrading, please switch it to “Parameter”.
To Next Page
Loading...
