VD32 Remote Controller User Manual v1.2
- 96 -
2020 SIYI Technology Copyright
4. Unzip the files, install the “SIYI Assistant” and the driver to the computer;
5. When it is finished, use an USB cable, connect its one end to the Micro-USB
port on VD32 transmitter, another end to the computer;
6. Run the “SIYI Assistant”, check transmitter’s current firmware version; if it was
not the latest version, tap on “Upgrade” to firmware upgrading menu;
7. Load the latest firmware, tap on “Upgrade” to upgrade firmware;
8. If you need to upgrade the voice broadcast files, please repeat the steps 6-7.
To Next Page
Loading...
