The symbol displayed on the device screen or in the information display changes
from to .
Restarting voice command input
The procedure for voice command input can be restarted in one of the following
ways:
›
by pressing the function key
;
›
by briefly pressing the button
VOICE
on the unit;
›
by briefly pressing the button
on the multifunction steering wheel.
Voice command not recognised
If a voice command is not recognised, the system answers with “Sorry?” and you
can give a new command.
If the system does not recognise the second voice command, the help message is
provided again and you can give a new command.
If even the 3rd. voice command is not recognised, the system plays the message
“Voice control cancelled” and the dialogue is closed.
Returning to higher-level menu
›
- Give the voice command Back.
Understanding of the voice commands depends on several factors.
›
Speak with a normal tone of voice without intonation and excessive pauses.
›
Avoid a bad pronunciation.
›
Close the doors, windows and sliding roof, to reduce or stop disturbing exterior
noise.
›
It is recommended to speak louder at higher speeds, so that the tone of your
voice is louder than the increased surrounding noise.
›
During the dialogue, limit additional noise in the vehicle, e.g. passengers talking
at the same time.
15
Voice control of the unit
To Next Page
Loading...
Need help?
General
