Connecting mobile phone with hands-free system
Introductory information
The hands-free system is indicated as SKODA_BT_wxyz in the Bluetooth
®
device
to be paired. wxyz is replaced with the last four symbols of the VIN code of your
vehicle. You can change the name of the hands-free system » page 13.
Prerequisites for successful pairing
›
Ignition is switched on.
›
Both the Bluetooth
®
function and the visibility of the hands-free sys-
tem » page 13 and mobile phone must be switched on » See the owner's man-
ual of the mobile phone.
Automatic connection
After switching on the unit, the system attempts to connect
1)
to the last connec-
ted mobile phone
2)
. If the connection cannot be established, the system will at-
tempt to connect to other previously connected phones, one by one.
During the automatic connection process, the system displays a list of function
keys:
■
- Display a list containing mobile phones which the system automatically at-
tempts to connect to; here, it is possible to specify that the system should con-
nect to one of the listed phones
■
Find telephone
- Search for a mobile phone » page 34
Disconnect the connection
›
By removing the ignition key (or turning off the ignition and opening the driver's
door in the case of vehicles with the KESSY system).
›
By disconnecting the hands-free system or switching off the Bluetooth
®
func-
tion in the mobile phone.
›
By switching off the Bluetooth
®
function in the unit » page 13.
›
By disconnecting or deleting the paired device from the list of paired devi-
ces » page 13.
Possible symbols in the list of found or paired devices
Symbol Description
Devices that support the functionality of the hands-free sys-
tem (Bluetooth
®
profile HFP)
a)
Devices that are connected to the hands-free system via
Bluetooth
®
profile HFP
a)
Bluetooth
®
players (Bluetooth
®
profiles A2DP and AVRCP)
b)
Bluetooth
®
player connected to the unit via Bluetooth
®
pro-
files A2DP and AVRCP
b)
a)
HFP is a Bluetooth
®
profile that supports the functionality of the hands-free system.
b)
A2DP and AVRCP are Bluetooth
®
profiles that support multimedia functions.
Note
You can pair a maximum of 20 devices. If this maximum number is reached, pair-
ing a new device will cause the device not used for the longest time to be deleted
automatically.
Pairing from the hands-free system
›
Press the button
PHONE
.
Where the mobile phone has been paired but the automatic connection is unsuc-
cessful, check that the mobile phone's Bluetooth
®
function is switched on and
that the device is visible.
Press the function key
B
» Fig. 21 on page 33 to check whether the Bluetooth
®
device is included in the list of paired devices.
If no mobile phone is connected to the hands-free system, the message Please
find and connect a mobile telephone is displayed.
If a mobile phone is connected to the hands-free system, press the button
B
» Fig. 21 on page 33.
›
Press
Find telephone
.
At the end of the search, the display shows the message Device search finished.
1)
Provided that the ignition and the Bluetooth
®
function are switched on.
2)
With some phones, it is necessary to set the connection to the device as "authorised" in order for the
automatic connection to be successful. If this is not set, the system will prompt you for a confirma-
tion each time you attempt a connection with the phone.
34
Phone
To Next Page
Loading...
Need help?
General
