Phone
Phone
Introductory information
The phone menu is only available when the ignition is on and the Bluetooth
®
function is activated.
To connect a mobile phone with the hands-free system, the two devices must be
paired » page 34.
After switching on the unit, the system attempts to connect
1)
to the last connec-
ted mobile phone
2)
. Further information » page 34.
Main menu
Fig. 21
Phone: Main menu
First and foremost, pay attention to the safety instructions » page 4.
Select and confirm all functions as described at the beginning of this man-
ual » page 6.
Call up the main menu
›
Press the button
PHONE
.
Possible error messages
Message Action
To use the Bluetooth function, please
switch the ignition on.
Switch on the ignition.
Please switch on Bluetooth.
Switch on the Bluetooth
®
func-
tion » page 13.
No Bluetooth devices paired.
Pair the mobile phone with the hands-
free system » page 34.
Explanation of graphic
Name of the mobile network provider
Name of the connected mobile phone/function key used to search for a
mobile phone or list of paired mobile phones
Speed dial favourite telephone numbers » page 35
Direct entry of a phone number » page 36
Display the phonebook » page 36
Display the call list (if there are missed calls, the number of missed calls is
shown next to the symbol
) » page 37
Settings in telephone mode » page 37
Symbols in the display
Symbol Description
Charge status of the phone battery
a)
Signal strength
a)
Roaming (before the name of the mobile network provider)
a)
Missed call
Current call
a)
This function is only supported by some mobile phones.
A
B
C
1)
Provided that the ignition and the Bluetooth
®
function are switched on.
2)
With some phones, it is necessary to set the connection to the device as "authorised" in order for the
automatic connection to be successful. If this is not set, the system will prompt you for a confirma-
tion each time you attempt a connection with the phone.
33
Phone
To Next Page
Loading...
Need help?
General
