Other destinations displayed in the map
Symbol Description Symbol Description
Home address
Favourite
Destination
Stopover destination
City centre
Town centre
Switch on/off display of company logos » page 44.
Route guidance
Route calculation
The route is calculated automatically according to the entered destination. The
calculation takes the settings of the route options » page 44 (route type, dynamic
route, etc.) into account.
The route is recalculated each time if you ignore driving recommendations or
change the route. This process takes only a few seconds. Driving recommenda-
tions can only then be re-transmitted.
If Demo mode is switched on » page 45, a prompt appears asking whether you
want the guidance to start in demo mode or normal mode.
If an alternative route option is set, function keys are displayed, following the cal-
culation, for the route types with information on the route length and the expec-
ted travelling time.
Function keys for route types:
Button Description
Economic route
Fast route
Short route
Selecting the route type will start route guidance.
After the route has been calculated, additional information specific to the selec-
ted route is displayed on the function keys for the route types» page 44, e.g., use
of motorways
, toll roads
etc.
If the option for alternative routes is disabled, the route is calculated and route
guidance is started according to the preferred route » page 44.
It is not necessary to wait for the calculation of all route types. It is possible to
select an already calculated route before the calculation of the remaining routes
is completed.
The unit tries to allow for continued guidance even if the navigation data is in-
complete or there is no data at all for the given area (e.g., one-way streets, road
types, etc.).
Interrupt and continue route guidance
If the ignition is switched off and on again and the key was left in the ignition (in
vehicles with the KESSY system, when the ignition was switched off):
›
within 30 minutes - route guidance is continued, taking into account the calcu-
lated route
›
Between 30 and 40 min - the screen switches to “standby” mode (energy-sav-
ing mode of the screen); the route guidance continues using the calculated
route
›
Between 40 min and 120 min - the unit screen displays the message Continue
route guidance?; after you confirm the message, the route guidance continues
using the calculated route;
›
After 120 min - The route guidance is cancelled.
If the ignition is switched off and on again and the key was removed (in vehicles
with the KESSY system, when the ignition was switched off and the driver's door
was opened):
›
Within 10 min - route guidance is continued, taking into account the calculated
route
›
Between 10 min and 120 min - the screen switches to “standby mode” (energy-
saving mode of the screen); the unit screen displays the message Continue
route guidance?; after you confirm the message, the route guidance continues
using the calculated route
›
After 120 min - The route guidance is cancelled.
Graphical navigation instructions
The graphical navigation instructions are displayed:
›
in the information display » page 42;
›
in the split screen of the unit screen.
57
Navigation
To Next Page
Loading...
Need help?
General
