Setting vehicle systems
Setting vehicle systems
Main menu
First and foremost, pay attention to the safety instructions » page 4.
Select and confirm all functions as described at the beginning of this man-
ual » page 6.
The vehicle systems setup functions can only be used when the ignition is
switched on.
Call up the main menu
›
Press the button
CAR
.
- Displays the vehicle data » page 62
/
- Allows you to change the currently playing track or radio station
- Set the auxiliary heater and ventilation » page 63
- Vehicle settings » page 63
Note
■
The individual systems are described in the » Vehicle Owner's Manual.
■
If the functions of some systems are disabled, some functions, such as parts of
the ESC system, are switched on again automatically for security reasons, after
switching the ignition off and on.
■
When you press the button
CAR
, the system displays the last displayed menu
from
.
Vehicle data
Fig. 44 Driving data/vehicle condition
›
Press the button
CAR
→
.
Explanation of graphic
Distance travelled
Driving time
Average speed
Average fuel consumption
Approximate range
Range (if the estimated range is less than 300 km, the vehicle starts to ap-
proach the symbol:
)
Vehicle representation (the zones of the vehicle are shown in different col-
ours, corresponding to any warning messages that occur. The warning mes-
sages are displayed once you touch vehicle)
■
Driving data
- Display driving data » Fig. 44
You can display one of three trip memories on the screen:
■
Since start - Driving data for the individual trip
■
Long-term - Long-term driving data
■
Since refuelling - Data since last refuelling
You can switch between the individual trip memories using
/
.
A
B
C
D
E
F
G
62
Setting vehicle systems
To Next Page
Loading...
Need help?
General
