Range selector key PHONE60
During a phone conversation
– If you press the function key during a phone conversation the current conver-
sation will be switched to “mute” (Display: “Call being held”). This means that the
connection remains intact while the audio transmission is interrupted.
– If you press the function key , again the conversation can be continued.
– If you press the function key , during a phone conversation, the connection to
the current call number will be terminated and the unit will change to the main
menu PHONE.
Carrying out an additional phone conversation
– Press on the function key during a phone conversation to put the current
conversation on “hold” as described above.
– Select a new call number or select a stored call number.
– If you are holding an additional conversation, you can switch between both parties
(“alternate”).
“Call waiting” and changing between two parties (Alternate)
– If you are called while holding a conversation, the number and the name of the
caller will appear below the current conversation on the touch-screen (Function:
“Call waiting”).
– Press on the function key in the line “Incoming call” to reject the second call.
– Press on the function key in the line “Incoming call” to accept the second call.
The connection to the first party will be interrupted but not broken (Display: “Call
being held”).
– If you press the function key in the line “Call being held”, the conversation with
this party will continue and the other party will be “put on hold”. In this way you
can alternate between two parties.
– Press the function key , to break the connection to the call number displayed in
this line.
DTMF key tones
A particular DTMF key tone is assigned to each each key of a phone. DTMF key tones
are used, for example, for the input of a password via the phone or for choosing a
colleague in a “Call center”.
If a DTMF key tone has to be entered during a conversation, you can open the keypad
field by pressing the function key at the bottom left and follow the instructions (for
example: “For a private conversation with one of our co-workers, please press ”).
You can store a longer DTMF key tone on your mobile phone. If, during a conversation,
this DTMF key tone has to be entered, call up the corresponding entry from the tele-
phone book as described.
If you press in the input mask on the function key , the displayed character
sequence in the entry line will be played as DTMF key tone sequence.
Please note that in a DTMF key tone sequence the character “+” must not appear, as it
interrupts the playing of a DTMF key tone.
^
^
^
3
DTMF
s32k.a.book Page 60 Friday, September 18, 2009 1:54 PM
To Next Page
Loading...
Need help?
General
