Skydio X10 - Lost Connection

65
Skydio X10 - Operator Manual © 2023 Skydio, Inc. All rights reserved.
Navigating Skydio Flight Deck
Lost Connection
Wait Before Return - set the amount
of time you want Skydio X10 to wait
before it initiates a return flight,
allowing time to reconnect
Land Aer Return - when enabled, your
drone will return, hover for a specified
amount of time, then land.
Wait Before Land - the amount of time
between 0 to 300 seconds (default is
240 seconds) that you want your drone
to wait above the landing location
before landing. This setting is only
enabled when Land Aer Return is
toggled on.
If connection is lost, Skydio X10 will default to the Lost Connection settings. Select
between Return and Hover upon lost connection.
Return