Skyjack SJ85 AJ User Manual

SJ85 AJ 213217AAA
41
Visual & Daily Maintenance Inspections Section 4 – Pre-operation
4.2-5 Engine compartment
Ensure all compartment latches are secure and in
proper working order.
1
Main power disconnect switch
▪
Turn main power disconnect switch to
off position.
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
Ensure all cables are secure and switch is in
proper working condition.
2
Batteries
▪
Proper battery condition is essential to good
engine performance and operational safety.
Improper uid levels or damaged cables and
connections can result in engine component
damage and hazardous conditions.
WARNING
Explosion hazard. Keep ames and
sparks away. Do not smoke near
batteries. Battery acid releases
explosive gas while charging. Charge
batteries in a well-ventilated area.
WARNING
Battery acid is extremely corrosive - Wear proper
eye and facial protection as well as appropriate
protective clothing. If contact occurs, immediately
ush with cold water and seek medical attention.
1. Check battery case for damage.
2. Ensure all battery connections are tight.
3. If applicable, check battery uid level. If plates
are not covered by at least 13 mm (1/2”) of
solution, add distilled or demineralized water.
WARNING
Use original or manufacturer-approved parts and
components for the MEWP.
3
Hydraulic pumps
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
Ensure all bolts are properly tightened.
▪
Ensure all ttings and hoses are properly
tightened and there is no evidence of hydraulic
leakage
4
Mufer and exhaust
▪
Ensure mufer and exhaust system are
properly secured, with no evidence of
damage.
5
Engine control console
▪
Ensure there are no loose or missing parts and
there is no visible damage
1
2
5
4
3

Skyjack SJ85 AJ Specifications

General

Brand	Skyjack
Model	SJ85 AJ
Category	Boom Lifts
Language	English