213217AAA SJ85 AJ
44
Section 4 – Pre-operation Visual & Daily Maintenance Inspections
Fuel leaks
▪
Ensure that there are no fuel leaks.
WARNING
Engine fuels are combustible. Inspect the MEWP
in an open, well-ventilated area away from heaters,
sparks and ames. Always have an approved re
extinguisher within easy reach.
▪
Ensure fuel tank, hoses and ttings show
no visible damage and no evidence of fuel
leakage.
4.2-7 Base
1
Turret transportation lock
▪
Ensure turret transportation lock is unlocked,
there are no loose or missing parts and there
is no visible damage.
Drive axles
▪
Ensure front drive axle
2
and rear drive axle
3
are properly secured, there are no loose
or missing parts, all ttings and hoses are
properly tightened and there is no evidence of
hydraulic leakage.
4
Tie rod
▪
Ensure there are no loose or missing parts,
tie rod end studs are locked and there is no
visible damage.
5
Oscillating cylinder assembly
▪
Ensure oscillating cylinder assembly is
properly secured and there are no visible
gaps, loose or missing parts, all ttings and
hoses are properly tightened and there is no
evidence of hydraulic leakage.
NOTE
Oscillating axle is locked when MEWP is in low
speed (refer to Figure 37).
1
3
2
4
5
5
To Next Page
Loading...
Need help?
General
