213217AAA SJ85 AJ
72
Section 6 – Additional Procedures Refueling Procedure
To install a propane cylinder:
1. Ensure engine and all systems are turned off
and emergency stop button is depressed.
2. Place propane cylinder on bracket or in
compartment.
3. Ensure metal peg on bracket or compartment is
inserted into propane cylinder rim.
4. Reconnect propane cylinder straps to hooks and
fasten tightly.
5. Attach coupler to propane cylinder and turn
clockwise to tighten tting.
6. Apply soap water or neutral detergent to pipe
connection and cylinder.
7. Open valve 1/4 turn counterclockwise and check
for any gas leaks.
8. Wipe off soap water or detergent after inspection
is completed.
9. Open main valve fully if there are no leaks.
To Next Page
Loading...
