Skyjack SJ85 AJ - Page 99

SJ85 AJ 213217AAA
99
SJ85 AJ Labels Section 8 – Labels
Description Label Pictorial
2
Grease points maintenance
Refer to service and maintenance manual for lubricating MEWP.
TM
3
Hydraulic oil
Replace hydraulic uid with approved type (see service manual).
4
Hydraulic oil level
Indicates minimum/maximum oil level.
HIGH/MAX
LOW/MIN
TM
5
Warning - Maintenance support
Do not enter the space beneath the work platform or extending
structure during maintenance unless a means of structure
support is in place. Refer to service manual for instructions
regarding machine power isolation and structure support during
maintenance.
TM
Control compartment (continued)
5
43
2