Skytech 32ST2000 - Front and Back Panel Diagrams

FRONT PANEL DIAGRAMS
1
Smart button
Please read the explanation below.
2
LED
When the TV is in standby mode, it lights up red.
3
Remote
Remote Control
Receiver
Infrared receiver sensor for remote control
You can control the following functions from the device without a remote control. You
can use the smart button on the device for this. Select the desired icon by pressing
the button repeatedly for a short time. Press and hold the button to activate the
function for the selected icon. The icons disappear automatically after 5 seconds.
Touch the key at the bottom of the screen to display the control icons.
Symbols and their functions
: Power-off symbol: Turns the device off.
: Menu symbol: Brings the
menu to the screen.
: Input source selection symbol: Selects the input source.
: Channel up symbol: Switches to the next upper channel.
: Channel down symbol: Switches to the lower channel.
: Volume up symbol: Increases the volume.
: Volume down icon: Reduces the volume.
15