(Cable Broadcast DVB-C Mode)
If the source selection on your TV is Cable (DVB-C), you can adjust the channel
settings with this menu.
Auto Scan: When you choose this option and press "Enter" to open the LCN option,
the channel numbers are locked and cannot be changed. When the Scan Mode is set
to "Full Scan," the entire frequency band is scanned and the channels found are
saved. If "Network Scan" is selected as Scan Mode, you must enter the network scan
parameters provided by your operator. After selecting the scan mode, se
lect Start
scan and press ENTER.
Manual Scan: When you select this option and press the "Enter" button, you can use
the right/left arrow keys to change the frequency channel you want to scan by
selecting the frequency from the menu that appears. After choosing the frequency,
select the Start scan option and press ENTER.
Channel List: You can view the registered channels from this menu.
Favorites List: You can view the channels in the favorites list from this menu.
Edit Channel: Select the channel you want to edit with the up/down
arrow keys and
press ENTER. Select the operation you want to perform and press "Enter". For
example, after selecting channel move, use the Up/Down arrow keys to move the
channel to the desired position and press ENTER.
Program Guide: You can view the EPG information for supported broadcasts from
this menu.
CI Information: If you have installed a module on your TV to watch encrypted
channels, you can view information about the encryption system from this menu. If the
module is not installed, this option will not be
active.
ACCESSIBILITY MENU
The features in this menu are only available for supported broadcasts. These menus
can display audio description provided by the broadcaster as well as subtitles for the
hearing impaired.
46
To Next Page
Loading...