Start Automatic Tuning for All LNBs: The auto search will start for the satellites you
selected, and the channels will be saved automatically after it is finished.
CI Card: With this menu you can view and change the Common Interface module
settings.
Audio Language: If the satellite broadcast supports more than one audio language,
you can select the audio language from this menu.
Channel List
You can edit the channel list and favorite channel settings from this menu. To edit the
channel list, scroll to the DTV channel list and se
lect the desired channel with the
directional buttons. Press the Menu button to move the channel, move it to the top,
delete it, add it to your favorites list, or skip it from the submenu that appears.
EPG: You can view the broadcast schedule of the channels on satellite broadcasts
that support it.
LOCK
You can change the current password (1234), enable password entry for system
settings, set the age restriction if the broadcast you're watching sends age restriction
information, and lock the buttons on the TV in this section.
Change Password: F
rom this section you can change the current password.
System Lock: When this option is enabled, the TV settings will be password
protected.
Parental Control: Setting the age restriction for the broadcast being watched. This
feature must be supported by the broadcast. Otherwise, the settings will be invalid.
GENERAL SETTINGS
PVR Setting: Disk settings can be made from this section if a USB disk is connected
to record TV broadcasts.
OSD Timer: You can set the duration of the OSD menu on the screen with this menu.
Auto Standby Timer: W
ait time for automatic switch-off when no button is pressed
from the remote control or TV. Off can be set to 1 3 hours 1 4 hours or 5 hours. After
32
To Next Page
Loading...