DiseqC1.1: If you use this system in your signal, you can sort the satellites from 1 to
16 as described above
Program Table: Move, skip, and delete selections can be used to organize channels
according to your wishes.
Schedule List: With this menu, the user can save the desired channels. For recording,
USB must be plugged into the TV.
NOTE: Since not every broadcasting channel has time information, your records may
not be correct. That is why you should select channels with time information.
Signal Information: Shows the signal in
formation of the channel you are watching.
CI Information: Module (CAM) can be used to decrypt encrypted Channels. You can
see the module information from this menu.
Satellite Dish Antenna Setup: You can use this menu to setup the satellite antenna
connected to your TV.
Press the EPG button to view the Transponder list for the selected satellite. By
selecting one or more frequencies, you can search the selected frequen
A new satellite can be added using the yellow button on the remote control.
Use the EPG button on
the remote control to navigate to the frequency list.
You can edit, add, delete and scan frequencies using the colored buttons on the
remote control.
DiseqC 1.0: If you use more than one satellite. Select according to the Diseqc
connection. EXAMPLE: DiseqC1.0 LNB1: Turksat; LNB 2: Hotbird etc. You can select
1-4 SATELLITE.
24
To Next Page
Loading...