1. Please read this user guide carefully before using the LED Display and keep it for
future reference. If the device is given to another person, give the operating instructions
along with the device.
Unpack the device and check that there is no damage to the device, its accessories,
or the cable. In case of any damage, breakage, or cracks on the device or the cable,
or if the accessories are damaged or missing, do not use the device and contact
your nearest authorized service center.
Plastic bags are extremely dangerous for child
ren and babies. Never allow children
and babies to play with the nylon plastic bags of the device or its accessories. Do
not leave nylon plastic bags near children and babies.
To avoid the risk of fire and electric shock, do not use the appliance in excessively
humid and damp conditions or near places with water such as bathrooms, bathtubs,
sinks or swimming pools.
Do not leave the device in precipitation (exposed to rain, snow, or wind), where
water may be splashed or spilled, or in a position where the device may fall into
water. Mak
e sure that no water or other liquid gets on the device. Vases, jugs, and
other containers filled with water or other liquids should not be placed near the
device. Do not use the device in environments where it may be exposed to water
vapor or moisture, as well as around humidifiers.
Keep the LED display away from all heat sources, such as stoves,
radiators, electric stoves, etc., and devices that generate magnetic
fields. Do not leave the device or its remote control in the vicinity of
flames, fire or liquid sources, or objects that m
ay pose a hazard to
avoid the risk of fire or damage to the device.
Keep the device, remote control, remote control batteries, and other accessories
away from direct sunlight and heat sources. Before plugging the device into an
electrical outlet, make other connections and make sure that all connections are
made correctly.
Before making any connections, turn off the device and disconnect the power cord.
Before installation, maintenance, cleaning or transportation, unplug the device from
the power outlet.
Before connecting the device's power plug, ensure that the electrical network is
suitable for the values specified on the device (AC 100-240V-50/60HZ) and that the
line is protected with a suitable fuse. Even if the power switch, if any, is turned off,
the device must not be disconnected from the power supply unless the power plug is
removed from the socket.
10. Insert the power plug into a socket located at the back of the device so that the cord
is not stepped on and is easily accessible when needed.
.
.
.
.
.
.
.
4
To Next Page
Loading...