SMA Sunny Island 5048 - Page 136

Parameter Lists SMA Technologie AG
Page 136 SI5048-11:EE4206 Technical Description
#270 System Settings
#263 05 RlyTmr2StrDt yyyymmdd 20060101 start date timer 2
#263 06 RlyTmr2StrTm hhmmss 0 start time for relay control timer 2
#263 07 RlyTmr2Dur hhmmss 0 run time for relay control timer 2
#263 08 RlyTmr2Cyc Single
Daily
Weekly
Single repeated cycle time for relay 2
#264 Relay Slave1
#264 01 Rly1OpSlv1 see
#261.01
Off Function of relay 1 on slave 1:
for details, see #261.01
#264 02 Rly2OpSlv1 see
#261.01
Off Function of relay 2 on slave 1:
for details, see #261.01
#265 Relay Slave2
#265 01 Rly1OpSlv2 see
#261.01
Off Function of relay 1 on slave 2:
for details, see #261.01
#265 02 Rly2OpSlv2 see
#261.01
Off Function of relay 2 on slave 2:
for details, see #261.01
#266 Relay Slave3
#266 01 Rly1OpSlv3 see
#261.01
Off Function of relay 1 on slave 3:
for details, see #261.01
#266 02 Rly2OpSlv3 see
#261.01
Off Function of relay 2 on slave 3:
for details, see #261.01
Menu
no.
Para-
meter
no.
Parameter name Range/
Short
descr.
Default
value
Description
#270 01 AutoStr
(Stby)
3 autostart (0 = autostart deactivated)
#270 02 Dt yyyymmdd date
#270 03 Tm hhmmss time
#270 04 BeepEna Off
On
On activates beeper
#270 05 ClstCfg cluster configuration
from QCG, read only
#270 06 ComBaud 1200
4800
9600
19200
1200 baud rate interface
#270 07 SleepEna Disable
Enable
Enable allows sleep mode
Menu
no.
Para-
meter
no.
Parameter name Range/
Short
descr.
Default
value
Description